Practical and good-looking, this MagSafe wireless charging stand will work with iPhones and Android phones if you use a magnetic case. It’s a weighty mix of metal and glass in black or white, with padding in all the right places. You can pick up or place your phone one-handed, and the stand doesn’t slide around or topple easily. It has a ring of powerful magnets to hold your phone in portrait or landscape orientation (handy for StandBy mode) and can charge at up to 15 watts. You get a nice braided cable in the box (USB-C to USB-C), but you will need a 20-watt charger, which is a bit cheeky at this price. WIRED readers can get 10 percent off sitewide at Nomad with the code WIRED10.

Want something to quickly juice up your phone and earbuds? Belkin’s UltraCharge 2-in-1 supports the latest Qi2 25W standard for the main magnetic charging coil, so this charger won’t feel out of date even in a few years. It looks nice enough to be a permanent fixture on the nightstand or desk, but you also have the option to fold it up and take it on the go. Over on the back, when unfolded, there’s a 5-watt wireless charger for earbuds (or a second phone in a pinch), plus there’s a spare USB-C port to plug in another device. Best of all, Belkin includes a 45-watt power adapter and cable, which is an incredible value at this price.

Magnetic chargers are so handy in the car if you have a Qi2 phone or a MagSafe iPhone, and this Pitaka model is my favorite. There are adjustable hooks to fit the mount tightly in any vent. The ball joint allows you to change the angle, the signature aramid fiber finish looks great, and you get a USB-C charging cable with two adhesive-backed cable management clips. I tested it with my Pixel 10 Pro XL and iPhone 16, and the mount held both securely and charged at 15 watts. This charger also has an NFC chip inside, so you can set up to three shortcuts, such as automatically launching Spotify when you dock your phone.

This versatile car mount from iOttie comes in two flavors: a suction cup for the dashboard/windshield or a CD/vent mount that clips into place. Adjust the height of the feet so your phone is always in the sweet spot for charging. The arms close around your phone automatically when it hits the trigger on the back of the mount, so you can place your device one-handed. (A release bar extends on either side so you can take your phone out again.) The mount has a MicroUSB port to plug in the supplied cable; just stick the other end in your car’s power socket. It handily includes a second USB-A port you can use to charge another phone. It’s limited to Qi wireless charging, so it won’t juice up as fast as our Pitaka option above.

Read our Best Car Phone Mounts and Chargers guide for more recommendations.

Kew Labs’ UTS-2 is unlike any other wireless charger in this guide—it disappears completely. Designed to be mounted below nonmetallic surfaces—a nightstand, countertop, or desk—it sends power through the tabletop and to your smartphone or wireless charging-capable device. That way, you get a true wireless experience, at least visually. The recommended thickness for the surface you plan to install it under is between 8 and 12 millimeters.

I tested the original UTS-1, but the newer model is far less bulky, easier to install, and performs better. There’s an adhesive back on the charger that stuck to my wood nightstand quickly, though you can screw it into place if you’d like. It comes with an alignment tool that lights up LEDs when you’re perfectly over the charger—you can then attach one of the many included stickers to indicate the charging spot. It took me less than two minutes. Charging won’t be fast—iPhones will top out at 7.5 watts, Samsung phones will handle 10 watts, and everything else is 5 watts. (It took roughly four to five hours to bring an iPhone 16e from zero to 80 percent.) But it’s perfect when you want to maximize your table space and don’t need to recharge quickly.

The silicone surface of this wireless charger easily accumulates dust and lint, but that might not matter to you if you’re shopping for the most eco-friendly charger. It’s made of recycled silicone, the texture of which helps keep phones from sliding off the surface. The rest of it is made with post-consumer plastic and alloy, and even the packaging is plastic-free. Better yet, if you have an iPhone 12 or newer with MagSafe, the magnets inside the Apollo will keep your iPhone aligned perfectly for more efficient charging, even if they’re not as strong as normal MagSafe wireless chargers. If you buy direct from Nimble, it also comes with a 20-watt charging adapter, which is great value.

Many chargers bill themselves as ideal travel companions, but Anker’s MagGo 3-in-1 is perhaps the most compact I’ve tested when folded flat. Despite its size, this travel charger can charge up your iPhone or Qi2-certified phone at up to 15 watts, has a second pad for AirPods or other wireless earbuds, and sports a fold-out Apple Watch charger. The box includes both a USB-C cable (around 5 feet) and a wall adapter. Only MagSafe iPhones and Qi2-certified Android phones have the magnets needed to use this as a stand, but I had no trouble charging an older Android phone by angling it back (Qi2 is backward compatible).

Ah, the holy Apple trinity. If you have an iPhone, Apple Watch, and AirPods (or honestly, any kind of earbuds with a wireless charging case), you’ll love this T-shaped Belkin stand. It’s a Qi2 and MagSafe charger, so it’ll suspend your magnet-enabled iPhone as if it’s floating in midair (and charge it at the fastest 15-watt speed). The Apple Watch will stick to its little puck, which can fast-charge the Apple Watch Series 7 or newer (not the SE), and you can recharge your earbuds at the base. It’s excellent. Belkin has a pad version if you’d like, but it takes up more room and isn’t as fun as the tree. Find more options in our Best Apple 3-in-1 Wireless Chargers guide.

This heavy 3-in-1 pad has a magnetic Qi2/MagSafe spot for your iPhone to lie flat, though it can also charge other Qi or Qi2 phones. The Apple Watch charger on the left supports Nightstand mode and fast charging for the latest Apple Watches, and there’s an AirPods charging spot behind. It’s a striking mix of glass and metal that comes in black or white; both blend in nicely with any decor. The weight and rubber feet ensure it doesn’t slide around on the nightstand. It comes with a 6.6-foot USB-C cable, but you’ll need to supply your own 30W power adapter, such as the Anker Nano. WIRED readers can get 10 percent off sitewide at Nomad with the code WIRED10.

The Quattro Charger Pro 4 from Zens is ideal for anyone seeking a multi-device wireless charging station, because this two-tier wireless charger has four spots capable of putting out up to 15 watts each. Well built, it stays put on a counter or desk and comes in black or white. It is Qi2 certified, works with MagSafe iPhones, and can charge any regular Qi phone or device (earbuds cases too). Setting it up somewhere central to keep phones out of bedrooms at night is a good idea if you’re trying to improve everyone’s sleep hygiene. The thick barrel port cable and beefy 65-watt power adapter are included, but this is quite a pricey charger.

Courant makes some of the prettiest wireless chargers out there, and my new favorite is the Mag:3 Classics/Essentials. I tried it in leather, but you can also save some cash with the linen version. There are two chargers here, but you can’t fit two phones side by side. It’s instead meant to be for one smartphone and one wireless earbuds case. I’ve used it with the iPhone 15 and AirPods Pro with no issues—the left charger is MagSafe-compatible and the right side is a Qi charger, and they both work with non-Apple products too. I’ve tested it with a Pixel phone using a MagSafe case and Google’s wireless earbuds, and it all juiced up accordingly. I love that there’s room to add your tchotchkes. It’s my dedicated sunglasses spot. It comes with a cable and power adapter. There’s an additional 10-watt USB-C port to charge another low-power device nearby, too.

With a healthy 10,000 mAh capacity, this magnetic power bank can fully recharge any phone with change. It will stick to MagSafe iPhones or Qi2 phones in portrait or landscape orientation, it has a handy kickstand, and it works with Apple’s StandBy mode. It even has a wee LED to show you remaining charge and time. You can also use the USB-C port to charge devices at up to 27 watts. Read our Best MagSafe Power Banks guide for more.

It may top our Best Smartwatches guide, but the Achilles heel for the Apple Watch is battery life. This sleek, black charger has an adjustable magnetic Qi2/MagSafe pad for your iPhone and a pad on the back to charge any Apple Watch, with room for the strap to droop. The pad folds flat for easy travel and allows for StandBy mode. You can also charge AirPods or other phones, if you need to, by folding the pad flat. Sadly, there’s a barrel port for the provided cable and charger (USB-C would be better). The Apple Watch charger can also be a little stiff and tricky to fold out, and it’s pricey, but this is a classy option for the nightstand.

Adoption of the Qi2 standard (offering MagSafe-style magnetic alignment for wireless charging) is proving slower than expected, but this nifty folding charger from Peak Design could be the perfect bridge. It is a slim, aluminum, hinged Qi2 wireless charging stand that folds flat, but Peak Design also offers magnetic cases for the top Samsung, Google, and Apple phones. I tested with the Pixel 8 case ($50), and it let me stick my Pixel 8 on the stand in portrait or landscape orientation. It charges phones at up to 15 watts and comes with a 6.6-foot USB-C cable and three adhesive clips to keep it neat.

You need a 20-watt power adapter (I like this teeny tiny Anker charger). Peak Design has a whole ecosystem of magnetic accessories, including a stand wallet, a tripod for mobile photography, and wall, bike, and car mounts. They are pricey, but everything I have tried is top quality and comes with a lifetime guarantee.

Got a new Pixel 10 phone? There are other, better chargers for the money, but the Pixelsnap Charger With Stand is a solid option that doesn’t take up much room, and it supports the latest Qi2 25-watt standard, meaning it will juice up compatible devices (like the Pixel 10 Pro XL or iPhone 17 range) quite fast. The base is hefty and doesn’t slide around, and my Pixel and iPhones have magnetically stuck to it without issue. (You can rotate the phone to charge it in landscape or portrait orientation.)

You can buy the Pixelsnap Charger if you don’t care for the stand. With the stand, however, you can easily pop out the charger if you want to keep using your phone as it charges, or leave it on the stand to recharge.

Wireless chargers are usually plastic and rarely blend in with their surroundings, but Kerf’s chargers are covered with 100 percent natural and locally sourced wood. Choose from 12 wood finishes, from walnut to padauk, and each will come with a cork base to prevent slips. Starting from $65, these chargers can get expensive if you opt for rarer woods. You have the option of engraving it. You can choose whether to get a cable and power supply ($25 extra), which is a nice way to prevent electronic waste if you already have those. Kerf also has magnetic options to take advantage of MagSafe.

Want to kit out your work-from-home setup? Conserve space and use a headphone stand that can also wirelessly charge your phone. Oakywood’s 2-in-1 has a base made from your choice of solid walnut or oak, and it looks gorgeous. Place your phone on it and it’ll recharge just as well as any other charger on this list. The steel stand makes for a nice place to hang up your cans when you’re done for the day. If you don’t care for the stand but like the look of the charger, the company sells a version with just the pad.

★ Another alternative: The Satechi 2-in-1 Headphone Stand with Wireless Charger ($56) is a shiny, sleek, and sturdy headphone stand with a Qi wireless charging pad for your iPhone or AirPods. It has magnets in it, so it’s great for anyone with a MagSafe Apple product. There’s also a USB-C port to charge up a second device.

Einova’s Charging Stone is made with 100 percent solid marble or stone—you can choose from a variety. Every single pick in this guide looks very much like a wireless charger, but I’ve had visiting friends ask if this one is a drink coaster. (I’m still figuring out whether that’s a good or bad thing.) It has zero LEDs, perfect for bedrooms; just try to hide the cable to truly make it blend into your home. We recommend putting a case on your phone when using it with this charger, as there’s a risk of scuffing up the back with these harder surfaces.

Most wireless chargers are dull in the design department, so I appreciate Casetify’s range of Magnetic Wireless Chargers that come adorned with fun artwork. My daughter loves this cat design, but there are hundreds to choose from (more than 600). Technically, this is a Qi charger with MagSafe, so it will align perfectly with MagSafe iPhones and charge at 7.5 watts, but it can also charge any Qi phone at up to 15 watts. I tested with a Pixel 6 and a Xiaomi 14 Ultra, and you have to align it carefully, but it works just fine. The charger is super slim and comes with a lovely, 3.3-foot, permanently attached, black and white, braided USB-C cable, but you will need a power adapter (I like this tiny Anker charger).

This clever design combines a hinged Qi2/MagSafe charging pad that supports StandBy mode for iPhones. It has a retractable USB-C cable on the right side that is shy of 2 feet and can charge a second device, like a laptop, tablet, or earbuds. It is lightweight, so you’ll want to use the sticky pad provided to secure it on your desk or nightstand to ensure it doesn’t tilt over. You get a USB-C cable with it, and it has a right-angled connector at one end, which is handy, since the power input is on the left-hand side. But you need to provide a power adapter rated at 100 watts to get the maximum charging rates out.

Cute robot faces make gadgets so much more fun, and this 2-in-1 charger from UGreen has an irresistible pixelated mug that changes expression when charging. Thankfully, it’s not just a pretty face. The hinged Qi2/MagSafe charging pad supports StandBy mode, and it tilts through 70 degrees to reveal a second pad for AirPods or other wireless earbuds to charge. There is also a USB-C out that you can plug a third gadget into. It comes with a 3.3-foot USB-C cable to plug into the back, but you need your own 30-watt power adapter (we like the Anker Nano at $14).

You are paying a premium for the cuteness here, but it’s worth it. If you don’t care about the face, I also like the slightly larger but faceless UGreen Nexode 4-in-1 ($130), as it has a similar tilting MagSafe pad (15 W) on top, but with two USB-C ports (up to 100 W) and one USB-A.

Could this be the first truly wireless wireless charger? Twelve South’s designs are often interesting, and the PowerBug is a smart idea, enabling you to attach your phone directly to an outlet magnetically. The US version has folding prongs, making it a super compact option for travel. Obviously, outlets are not the ideal places to charge. You may find the PowerBug blocks adjacent outlets, and it works far better when they’re higher up, like you’d find in a kitchen.

It supports 15-watt charging of Qi2 devices, and I tested with the Pixel 10 Pro XL and the iPhone 16. The PowerBug got a little warm, but it worked well and triggered StandBy mode for the iPhone. Some online reviews complain that the magnets were weak and charging was flaky, but I didn’t encounter those issues. It also has a 35-watt USB-C PD port, so you can charge a second phone or another small gadget by plugging in a USB-C cable (not included).